Allied Telesis AT-X510-52GTX-N1 48-PORT 10/100/1000T STACKABLE SWITCH WI

Allied Telesis x510 Series switches are a high-performing and feature-rich choice for today's networks. They offer a versatile solution for Enterprise applications. With a choice of 24- and 48-port models with 1/10Gigabit uplink ports, plus the power of Allied Telesis Virtual Chassis Stacking (VCStack ), the x510 Series can connect anything from a small workgroup to a large business.

Powerful network management

Meeting the increased management requirements of modern converged networks, Allied Telesis Autonomous Management Framework (AMF) automates many everyday tasks including configuration management. The complete network can be managed as a single virtual device with powerful centralized management features. Growing the network can be accomplished with plug-and-play simplicity, and network node recovery is fully zero-touch.AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third party devices, such as IP phones and security cameras, to be part of an AMF network.

Network resiliency

The convergence of network services in the enterprise has led to increasing demand for highly available networks with minimal downtime. VCStack, in conjunction with link aggregation, provides a network with no single point of failure and an easy, resilient solution for high availability applications. The x510 Series can form a VCStack of up to four units for enhanced resiliency and simplified device management.Allied Telesis Ethernet Protection Switched Ring (EPSRing ), and the standards-based G.8032 Ethernet Ring Protection, ensure that distributed network segments have high-speed, resilient access to online resources and applications.Ring Protection and VCStack Long- Distance (VCStack-LD), which enables stacks to be created over long distance fiber links, make the x510 Series the perfect choice for distributed environments.

Reliable

The x510 Series was designed with reliability in mind, and guarantees continual delivery of essential services. With dual built-in power supplies and near-hitless online stack reconfiguration, maintenance may be performed withoutaffecting network uptime.The x510DP features dual hot-swappable load-sharing power supplies for maximum uptime. With front-to-back or back-to-front cooling options, the x510DP is ideal for data center applications.The x510L Series switches enable high-value solutions at the network edge.

Secure

Advanced security features protect the network. Unprecedented control over user access is provided with Network Access Control (NAC), mitigating threats to network infrastructure. This ensures the network is accessed only by known users and devices - all users' adherence to network security policies is checked, and then either access is granted or remediation is offered. Secure access can also be provided for guests.

Future-proof

The x510 Series ensures a future-proof network, with superior flexibility coupled with the ability to stack multiple units. All x510 Series models feature 1/10 Gigabit uplinks ports and a comprehensive IPv6 feature set, to ensure they are ready for future network traffic demands. All x510 24-port models are Software Defined Networking (SDN) ready and are able to support OpenFlow v1.3.

Environmentally friendly

The x510 Series supports Energy Efficient Ethernet (EEE), automatically reducing the power consumed by the switch whenever there is no traffic on a port. This sophisticated feature can significantly reduce operating costs by reducing the power requirements of the switch and any associated cooling equipment.

Performance40Gbps of stacking bandwidthSupports 13KB jumbo framesWirespeed multicasting4094 configurable VLANsUp to 16K MAC addressesUp to 256 OpenFlow v1.3 entriesUp to 1K multicast entriesRoutes: 2K (IPv4), 256 (IPv6)Up to 128 Link Aggregation Groups (LAGS) - any combination of static and dynamic (LACP)512MB DDR SDRAM, 64MB flash memoryPacket buffer memory: AT-x510-28 - 2MB, AT-x510-52 - 4MBReliabilityModular AlliedWare Plus operating systemThe x510 features dual internal redundant PSUsThe x510-28GSX-80 features dual DC PSUsThe x510DP features dual hot-swappable PSUs, providing uninterrupted power and extra reliabilityThe x510L has a single internal PSUFull environmental monitoring of PSUs, fans, temperature and internal voltages. SNMP traps alert network managers in case of any failurePower CharacteristicsAC voltage: 90 to 260V (auto-ranging)/li>Frequency: 47 to 63HzDC voltage (x510-28GSX-80): -48/-60VExpandabilityStack up to four units in a VCStackVersatile licensing options for additional featuresFlexibility and CompatibilityGigabit SFP ports on x510-28GSX will support any combination of Allied Telesis 100Mbps and 1000Mbps SFP modules listed in this document under Ordering Information10G SFP+ ports will support any combination of Allied Telesis 1000Mbps SFP and 10GbE SFP+ modules and direct attach cables listed in this document under Ordering Information*Stacking ports can be configured as 10G Ethernet portsPort speed and duplex configuration can be set manually or by auto-negotiationDiagnostic ToolsActive Fiber Monitoring detects tampering on optical linksBuilt-In Self Test (BIST)Find-me device locatorAutomatic link flap detection and port shutdownConnectivity Fault Management (CFM)Continuity Check Protocol (CCP) for use with G.8032 ERPSOptical Digital Diagnostic Monitoring (DDM)Ping polling and TraceRoute for IPv4 and IPv6Port and VLAN mirroring (RSPAN)Cable fault locator (TDR)Uni-Directional Link Detection (UDLD)IPv4 FeaturesBlack hole routingDirected broadcast forwardingDNS relayEqual Cost Multi Path (ECMP) routingPolicy-based routingRoute redistribution (OSPF, BGP)Static unicast and multicast routing for IPv4UDP broadcast helper (IP helper)IPv6 FeaturesDHCPv6 client and relayDNSv6 client and relayIPv4 and IPv6 dual stackIPv6 QoS, storm protection and hardware ACLsDevice management over IPv6 networks with SNMPv6, Telnetv6, SSHv6 and Syslogv6NTPv6 client and serverStatic unicast and multicast routing for IPv6ManagementFront panel 7-segment LED provides at-a-glance status and fault informationAutonomous Management Framework (AMF) enables powerful centralized management and zero-touch device installation and recoveryTry AMF for free with the built-in Starter licenseConsole management port on the front panel for ease of accessEco-friendly mode allows ports and LEDs to be disabled to save powerWeb-based Graphical User Interface (GUI)Industry-standard CLI with context-sensitive helpPowerful CLI scripting engineComprehensive SNMP MIB support for standards-based device managementBuilt-in text editorEvent-based triggers allow user-defined scripts to be executed upon selected system eventsUSB interface allows software release files, configurations and other files to be stored for backup and distribution to other devicesQuality of Service8 priority queues with a hierarchy of high priority queues for real time traffic, and mixed scheduling, for each switch portLimit bandwidth per port or per traffic class down to 64kbpsWirespeed traffic classification with low latency essential for VoIP and real-time streaming media applicationsPolicy-based QoS based on VLAN, port, MAC and general packet classifiersPolicy-based storm protectionExtensive remarking capabilitiesTaildrop for queue congestion controlStrict priority, weighted round robin or mixed schedulingIP precedence and DiffServ marking based on layer 2, 3 and 4 headersResiliency FeaturesBPDU forwardingStacking ports can be configured as 10G Ethernet portsControl Plane Prioritization (CPP) ensures the CPU always has sufficient bandwidth to process network control trafficDynamic link failover (host attach)EPSRing (Ethernet Protection Switched Rings) with SuperLoop Protection (SLP)EPSR enhanced recovery for extra resiliencyLong-Distance VCStack (LD-VCStack)Loop protection: loop detection and thrash limitingPVST+ compatibility modeSTP root guardVCStack fast failover minimizes network disruptionSecurity FeaturesAccess Control Lists (ACLs) based on layer 3 and 4 headers, per VLAN or portConfigurable ACLs for management trafficAuth fail and guest VLANsAuthentication, Authorisation and Accounting (AAA)Bootloader can be password protected for device securityBPDU protectionDHCP snooping, IP source guard and Dynamic ARP Inspection (DAI)DoS attack blocking and virus throttlingDynamic VLAN assignmentMAC address filtering and MAC address lock-downNetwork Access and Control (NAC) features manage endpoint securityPort-based learn limits (intrusion detection)Private VLANs provide security and port isolation for multiple customers using the same VLANSecure Copy (SCP)Secure File Transfer Protocol (SFTP) clientStrong password security and encryptionTri-authentication: MAC-based, web-based and IEEE 802.1xRADIUS group selection per VLAN or portRADIUS ProxySoftware-Defined Networking (SDN)OpenFlow v1.3 with support for encryption, connection interruption and inactivity probeEnvironmental SpecificationsOperating temperature range:0C to 45C (32F to 113F)Derated by 1C per 305 meters (1,000 ft)Storage temperature range:-25C to 70C (-13F to 158F)Operating relative humidity range:5% to 90% non-condensingStorage relative humidity range:5% to 95% non-condensingOperating altitude:3,048 meters maximum (10,000 ft)Electrical Approvals and CompliancesEMC: EN55022 class A, FCC class A, VCCI class A, ICES-003 class AImmunity: EN55024, EN61000-3-levels 2 (Harmonics), and 3 (Flicker) AC models onlySafetyStandards: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1Certification: UL, cUL, TUV ( TUV is on all models except the AT-x510DP-52GTX)